Elitegroup MD210 (V1.0) - Manual (Page 61)

56
Intel ® Remote Wake Technology
2. Verify that Hybrid Sleep is disabled in Windows Vista.
a. Click Start --> Control Panel --> Power Options
b. Set Allow hybrid sleep to Off . This will allows Windows Vista
to enter pure Sleep mode.
3. Verify that your computer has a wired Internet connection. IRWT requires an always on
wired Internet connection while your computer is in sleep mode. Your computer must be
configured to obtain an IP (Internet Protocol) address automatically using DHCP (Dynamic
Host Configuration Protocol). To configure your network settings for Intel Remote Wake
Technology:
a. Click Start --> Control Panel --> Network and Internet.
b. Click Network and Sharing Center.
c. Select your network connection and click View status.
d. Click Properties.
e. Select Internet Protocol Version 4 (TCP/IPv4), and then
click Properties.
f. Confirm that Obtain an IP address automatically is
selected.