Elitegroup MD210 (V1.0) - Manual (Page 37)

32
Using BIOS
TPM Enable/Disable Status (Enabled)
This item displays the TPM status to be enable/disable.
TPM Owner Status (UnOwned)
This item displays the TPM to be owned or not.
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
Help Item
Options
Auto
667 MHz
800 MHz
Configure DRAM Timing by SPD (Enabled)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
mnlk : Move F10: Save ESC: Exit Enter: Select +/-/: Value
F9: Load default settings F1: General Help
Press to return to the main menu setting page.
DRAM Frequency Auto
Configure DRAM Timing by SPD Enabled
Share Memory Size 64MB
DVMT/FIXED Memory 256MB
Memory Remap Feature Enabled
HPET Enabled
ME Subsystem Configuration Press Enter f
Intel XD Bit (Disabled)
This item allows users to enable or disable the Intel XD bit.
Intel AMT (Enabled)
This item enables or disables Intel AMT (Active Management Technology) sup-
port.
ASF (Enabled)
This item enables or disables ASF (Alert Standard Format) management controller.
Intel Virtualization Technol (Enabled)
Hardware Virtualization Technology enables processor feature for running multiple
simultaneous Virtual Machines allowing specialized software applications to run in
full isolation of each other.