Elitegroup MD210 (V1.0) - Manual (Page 41)

36
Using BIOS
Resume on RTC Alarm (Disabled)
If you enable this item, the system can automatically resume at a fixed time based on
the system’s RTC (realtime clock). Use the items below this one to set the date and
time of the wake-up alarm.
Press to return to the main menu setting page.
PC Health Status
On motherboards support hardware monitoring, this item lets you monitor the
parameters for critical voltages, temperatures and fan speeds.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
f
mnlk : Move F10: Save ESC: Exit Enter: Select +/-/: Value
F9: Load default settings F1: General Help
-=- System Hardware Monitor-=-
Smart Fan Function
Press Enter
Smart Fan Enabled
Shutdown Temperature Disabled
Warning Temperature Disabled
CPU Temperature : 40°C/104°F
System Temperature : 29°C/84°F
SYS_FAN1 Speed : 1901 RPM
SYS_FAN2 Speed : 2070 RPM
CPU VCore : 1.296 V
VDIMM : 1.845 V
Smart Fan Function (Press Enter) f
Scroll to this item and press to view the following screen:
SMART Fan start PWM value (58)
This item is used to set the start PWM value of the smart fan.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Help Item
mnlk
: Move F10: Save ESC: Exit Enter: Select +/-/: Value
F9: Load default settings F1: General Help
SMART Fan start PWM value 58
SMART Fan start TEMP. (°C) 55
CPU DeltaT +3
SMART Fan Slope PWM value 4PWM value/°C