Elitegroup MD210 (V1.0) - Manual (Page 44)

39
Using BIOS
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Press to return to the main menu setting page.
Supervisor Password (Not Installed)
This item indicates whether a supervisor password has been set. If the password has
been installed, Installed displays. If not, Not Installed displays.
Supervisor Password
This page helps you install or change a password.
Press to return to the main menu setting page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Supervisor Password
Install or Change the
password.
Help Item
Supervisor Password : Not Installed
Change Supervisor Password Press Enter
Load Default Settings
This option opens a dialog box to ask if you are sure to install optimized defaults or
not. You select [OK], and then , the Setup Utility loads all default values; or
select [Cancel], and then , the Setup Utility does not load default values.
mnlk
: Move F10: Save ESC: Exit Enter: Select +/-/: Value
F9: Load default settings F1: General Help
Change Supervisor Password (Press Enter)
You can select this option and press to access the sub menu. You can use the
sub menu to change the supervisor password.
CPU Frequency Setting (333MHz)
This item indicates the current CPU frequency. Users can not make any change to
this item. Please note that the frequency will be varied with different CPU.
Auto Detect DIMM/PCI Clock (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.