Elitegroup MD210 (V1.0) - Manual (Page 21)

16
Installing the Motherboard
The slots on this motherboard are designed to hold expansion cards and connect
them to the system bus. Expansion slots are a means of adding or enhancing the
motherboard’s features and capabilities. With these efficient facilities, you can
increase the motherboard’s capabilities by adding hardware that performs tasks that
are not part of the basic system.
Installing Add-on Cards
Expansion Slots
SCN1~2 Slots The SCN1~2 slots are used to install external PCI Express graph-
ics cards.
Before installing an add-on card, check the documentation for
the card carefully. If the card is not Plug and Play, you may have
to manually configure the card before installation.
Table B: Supported Wireless LAN Card List for SCN1~2 Slots
Vendor Module Name
Gemtek WPEB-109N
LITEON WN6500M