Brocade ICX 6610 Stackable Switch Hardware Installation Guide - Manual (Page 88)

Cable length summary (Continued) TABLE 19
Cable
Type Connector Type Core
Diameter(microns) Modal
Bandwidth(MHz*km) or
Wavelength (nm) Range
(meters)
1000Base-T Copper RJ-45 jack for
standard
unshielded
twisted pair (UTP
or Category 5) n/a n/a up to 100
meters
100Base-FX MMF LC connector for
SFP module 62.5 500 up to 2000 (2
km)
100Base-FX-
IR SMF LC 9 125 15 km (9.32
miles)
100Base-FX-
LR SMF LC 9 125 40 km (24.85
miles)
40G QSFP
cable Direct Attached QSFP copper
cables (used for stacking only) N/A N/A 1 and 5
Power cords
All devices ship with United States-compatible power cords unless otherwise specified at the time of
order. United Kingdom- and European-compatible power cords are also available.
AC power supply specifications
All devices ship with one removable AC power supply unit with a standard IEC type (IEC320) input
connector, operating universal or wide input. The following table lists the AC power supply
specifications for these devices.
Power specifications TABLE 20
Input voltage range Power draw (1 power
supply)
Power draw (2 power
supplies) Max output power (1
power supply)
ICX 6610-24F 100 - 240 VAC 125 Watts 145 Watts 250 Watts
ICX 6610-24P 100 - 240 VAC 120 Watts 140 Watts 1000 Watts
ICX 6610-24 100 - 240 VAC 120 Watts 140 Watts 250 Watts
ICX 6610-48 100 - 240 VAC 165 Watts 185 Watts 250 Watts
ICX 6610-48P 100 - 240 VAC 165 Watts 185 Watts 1000 Watts
Power cords
86 Brocade ICX 6610 Stackable Switch Hardware Installation Guide
53-1003082-02