Brocade ICX 6610 Stackable Switch Hardware Installation Guide - Manual (Page 23)

For instructions on installing and replacing a power supply refer to Installing and replacing a power
supply unit on page 53 section. For information on LED status refer to Power status LEDs table in the
section Port, system, and power status LEDs on page 17.
FIGURE 16 ICX 6610 AC power supply receptacle on 48-port models
1. AC power receptacle
1 DC power receptacle
FIGURE 17 ICX 6610 DC power supply receptacle on 48-port models
PoE and PoE+ power
The 1000W power supply provides 250W for the system and 750W for PoE. A device with two 1000W
power supplies installed provides 1500W for PoE. The total power allocation of all PoE ports on a
device cannot exceed the maximum PoE power available from the device. For example, each 1000W
power supply supports a maximum of 24 PoE+ (30W) ports.
PoE and PoE+ power
Brocade ICX 6610 Stackable Switch Hardware Installation Guide 21
53-1003082-02