Brocade Network OS YANG Reference Manual v4.1.1 - Manual (Page 228)

216 Network OS YANG Reference Manual
53-1003230-01
Custom RPCs
A
get-mac-address-table brocade-mac-address-ta
ble Returns the MAC address table for a given
MAC address.
get-media-detail -ext Returns the media properties of all the
interfaces of the managed entity.
get-netconf-client-capabilities brocade-netconf-ext Returns the vendor information for all
NETCONF clients.
get-port-channel-detail brocade-lag Returns link aggregation control
configuration parameters for all the
port-channels in the system.
get-portchannel-info-by-intf brocade-lag Returns link aggregation control
configuration parameters for a given
aggregation port in the system.
get-port-profile-for-intf brocade-port-profile-ext Returns the port-profiles applied on ports
and port-channels.
get-port-profile-status brocade-port-profile-ext Returns the status of a port-profile.
get-stp-brief-info brocade-xstp-ext Returns Spanning Tree Protocol (STP)
information.
get-stp-mst-detail brocade-xstp-ext Returns Multiple Spanning Tree Protocol
(MSTP) details.
get-system-uptime brocade-system Returns the time since the managed
entity was last reinitialized.
get-vcs-details brocade-vcs Retains detailed VCS fabric information.
get-vlan-brief -ext Returns operational data for a given VLAN
and enumeration of all the interfaces
belonging to this VLAN.
get-vmpolicy-macaddr brocade-vswitch.yang Takes vCenter name as mandatory input,
datacenter name as optional input.
All is not supported input anymore.
Datacenter name added in output.
get-vnetwork-dvpgs brocade-vswitch.yang Takes vCenter name as mandatory input,
datacenter name as optional input.
All is not supported input anymore.
Datacenter name added in output.
get-vnetwork-dvs brocade-vswitch.yang Takes vCenter name as mandatory input,
datacenter name as optional input.
All is not supported input anymore.
Datacenter name added in output.
get-vnetwork-hosts brocade-vswitch.yang Takes vCenter name as mandatory input,
datacenter name as optional input.
All is not supported input anymore.
Datacenter name added in output.
get-vnetwork-portgroups brocade-vswitch.yang Takes vCenter name as mandatory input,
datacenter name as optional input.
All is not supported input anymore.
Datacenter name added in output.
TABLE 5 Custom RPCs (Continued)
RPC name Host module Synopsis