Brocade Network OS YANG Reference Manual v4.1.1 - Manual (Page 198)

186 Network OS YANG Reference Manual
53-1003230-01
brocade-vcs
2
brocade-vcs
Description Provides a data model for managing the Brocade VCS fabric.
VCS fabric refers to the ability of a group of physical Ethernet switches, interconnected in an
arbitrary way using the regular front-end data ports, to appear as one unified and transparent
Ethernet switching service to the external network. The network that connects these individual
switches is referred to as the fabric. The group of physical Ethernet switches in the fabric is referred
to as the cluster.
The cluster behaves like a logical switch to the external network.
Top-level
containers
Top-level nodes and their subtree hierarchies follow.
module: brocade-vcs
+--rw vcsmode
| +--rw vcs-mode boolean
| +--rw vcs-cluster-mode boolean
+--rw local-node
| +--rw swbd-number uint32
+--rw vcs
+--rw virtual
| +--rw ip
| +--rw address? common-def:ipv4-address-prefix-type
| +--rw inbound? empty
+--rw virtual-fabric
+--rw vfab-enable? empty
External
augmentations
None
RPCs Custom RPCs defined in this module follow.
+---x get-last-config-update-time
| +--ro output
| +--ro last-config-update-time? uint64
+---x show-vcs
| +--ro output
| +--ro principal-switch-wwn? string
| +--ro co-ordinator-wwn? string
| +--ro vcs-cluster-type-info? vcs-cluster-type
| +--ro vcs-guid? string
| +--ro virtual-ip-address? string
| +--ro total-nodes-in-cluster? uint16
| +--ro nodes-disconnected-from-cluster? uint16
| +--ro cluster-generic-status? string
| +--ro cluster-specific-status? string
| +--ro vcs-nodes
| +--ro vcs-node-info
| +--ro node-num? uint16
| +--ro node-serial-num? string
| +--ro node-condition? string
| +--ro node-status? string
| +--ro node-hw-sync-state? node-hw-sync-state-type
| +--ro node-vcs-mode? string
| +--ro node-vcs-id? uint16
| +--ro node-rbridge-id? uint16
| +--ro node-is-principal? boolean
| +--ro co-ordinator? boolean