Brocade Network OS YANG Reference Manual v4.1.1 - Manual (Page 184)

172 Network OS YANG Reference Manual
53-1003230-01
brocade-system-monitor
2
brocade-system-monitor
Description Provides a data model for configuring monitoring thresholds for field-replaceable units (FRUs) and
for configuring Fabric Watch e-mail alerts. When a threshold is breached or when an FRU is
inserted or removed, a RASlog message is generated. Using this module, you can configure the
marginal threshold and down threshold values for the following FRUs:
• Fans
• Power supplies
• Chassis ID (CID) card
• Each Small Form-Factor Pluggable (SFP) media interface
• Compact flash
• Management Module (MM)
• Line cards
• Switch Fabric Module (SFM)
Top-level
containers
Top-level nodes and their subtree hierarchies follow.
module: brocade-system-monitor
+--rw system-monitor
| +--rw fan
| | +--rw threshold
| | | +--rw marginal-threshold? uint32
| | | +--rw down-threshold? uint32
| | +--rw alert
| | +--rw state? supported-state
| | +--rw action? supported-actions
| +--rw power
| | +--rw threshold
| | | +--rw marginal-threshold? uint32
| | | +--rw down-threshold? uint32
| | +--rw alert
| | +--rw state? supported-state
| | +--rw action? supported-actions
| +--rw temp
| | +--rw threshold
| | +--rw marginal-threshold? uint32
| | +--rw down-threshold? uint32
| +--rw cid-card
| | +--rw threshold
| | | +--rw marginal-threshold? uint32
| | | +--rw down-threshold? uint32
| | +--rw alert
| | +--rw state? supported-state
| | +--rw action? supported-actions
| +--rw sfp
| | +--rw alert
| | +--rw state? sfp-supported-state
| | +--rw action? supported-actions
| +--rw compact-flash
| | +--rw threshold
| | +--rw marginal-threshold? uint32
| | +--rw down-threshold? uint32
| +--rw MM
| | +--rw threshold