Renkus-Heinz ICL-R User Manual

Page 6

ive Users Manual - Models ICL-R & IC215S-R

Assembly

IC Live is a building block system designed for easy transportation,

setup and tear down. It provides for 6 system configurations from two

basic modules, the ICL-R array module and the IC215S-R subwoofer.

Setup couldn’t be easier. To create a stacked array from two ICL-R

modules:

1. Stand the two column arrays side by side and remove the two join-

ing bars and their short quick release pins from the modules.

2. Place one of the modules on top of the other one. Note that the top

module should be turned upside down so the horn sections of the two

modules are together.

3. Align the two modules and then remove the quick release pin from

the upper module’s rear cylinder to allow its inner sleeve to drop

down into the lower module’s rear cylinder.

4. Then re-insert the quick release pin into the upper module’s cylin-

der to lock the inner sleeve in place.