Renkus-Heinz ICL-R User Manual

Page 26

ive Users Manual - Models ICL-R & IC215S-R

At this point you can set up the inputs in the Connect window and by moving to the Control window set up the array’s control parameters,

just as you would if you were working with a real array.. The only difference is that any setting changes will be saved to a project file and

not to the array.. These settings can then be loaded into the array at the job site over the Ethernet network.

Linking Software Icons With Networked Arrays

To link the virtual array(s) you created in RHAON to the actual array(s), connect your computer running RHAON software to the network

and click on Scan Network. RHAON will find and identify all the arrays on the network and automatically assign them IP addresses .

RHAON will also identify any other CobraNet devices or RHAON empowered loudspeakers on your network and list them along with the

array(s) under the Network sub-directory in the directory tree.

Drag each individual array listing from the Network sub-directory into the main work space and drop it on the appropriate icon.