Renkus-Heinz ICL-R User Manual

Page 31

ive Users Manual - Models ICL-R & IC215S-R

The opening Beam Steering window shown on the previous page doesn’t show the array’s beam. Pressing the Calculate Mapping button

and following the prompts tells the program to calculate and display the beam. A typical Map appears below.

Note the four control buttons in the lower right corner of the Beam Steering

window. Pressing Write to Device will send any beam steering configuration

setting changes you have made directly to the array’s DSP and write over any

previous settings.

Pressing Save to Preset will store the configuration settings as a configuration

Preset in the selected preset file. We’ll go into Presets in more detail later.

Note that in both cases, only the beam steering information is being sent to the

Array’s.

Export Setup will generate a .rhs setup file that can easily be imported into an

EASE and EASE JR model for a detailed acoustic evaluation. Beam Steering

shows you the array’s vertical coverage, but not the horizontal coverage or the

effect of reflections on intelligibility and clarity. EASE and EASE JR do.

Import Setup allows you to import into Beam Steering any changes you may have made in the configuration settings in EASE or EASE JR.