Nexo NUAR - Manual (Page 91)

NXES104 EXPANSION BOARD, REMOTE CONTROL AND ASIO DRIVER
ASIO to NXAMP
In this mode the four digital inputs of the NXES104 board are not fed by an Ethersound™
compatible device on the IN our OUT port, but from a computer connected directly or
through a LAN on the Remote ES100 port of the NXES104, running the ASIO streamer
software.
In that mode, the “Ethersound” title on the four digital input meters is replaced by “ASIO”,
and the Ethersound™ I/O Patch of the NXAMP becomes unavailable.
NB: Although remote control of the NXAMP can be done from the Ethersound™ IN port or
from the Remote ES100 port, streaming ASIO can only be done from the Remote ES100
port.
PAGE 91 OF 140