Nexo NUAR User Manual
Page 52
MENU DESCRIPTION
Once the bridge mode has been selected (or not in our example) you will be prompt to
choose among various speaker mode if available. In the case of the PS15R2, the mode is
either “Normal” or “MON” for Monitoring application. Let’s select the standard mode in this
example.
NB: if only one mode is available for the selected speaker, this step will be skipped.
Now the latest part of this custom setup for a specific channel is to choose among the
available crossover, when available. Most passive cabinets and subs offer multiple
crossover options, but HF output for active cabinets usually has just one.
NB: if only one crossover is available for the selected mode, this step will be skipped.
Once the OK button is pressed, the display goes back to the four channel information
display, while the selected speaker for CH1 is recalled into the NXAMP.
NB: If another channel is mandatory linked to the selected one (for example back and front
speakers of a CARDIO speaker) then the next channel will be automatically recalled.
PAGE 52 OF 140