MAHLE RTI ESX-2 - Manual (Page 4)

Page 3
BEFORE FIRST TIME USE
Pour one-half bottle (4 ounces) of the RTI FUEL SYSTEM CLEANER
into the Fill Port.
Then pour gasoline into the Fill Port until the level is at the EMPTY
mark in the Fuel Level Window.
This will ensure precise concentration of fuel to cleaner.
Safety Precautions
WARNING: Failure to follow these precautions can result in serious
injury or death.
• Read and understand the Operation Manual completely before operating this unit.
• Always wear proper eye and skin protection when operating and maintaining this equipment.
• Take precautions to keep clothing, hair, hands, hoses, etc. away from all moving parts of the
vehicle.
• Fuel systems can be under high pressure, even after the engine has been turned off, and
engine parts can be extremely hot. Always use extreme caution when connecting and
disconnecting hoses and adapters.
• Always keep a fire extinguishing device nearby when working with flammable liquids.
• NOTE: Vehicle exhaust contains Carbon Monoxide, which is lethal and odorless.
Choose a well ventilated work area and avoid inhaling any fumes when operating the
equipment.
• Check engine oil and coolant level. Refill if low. Do not perform the cleaning if either is low.
• Flush solutions are combustible and are harmful if swallowed. If swallowed call a doctor
immediately and do not induce vomiting. If Flush Solution gets in the eyes flush with water
immediately. For contact with skin wash with soap and water. Apply skin lotion if necessary
to sooth irritation.
• Immediately clean up any gasoline or chemical spills and use a proper container for disposal.
• Comply with local, state, and federal regulations for fluid disposal.
• Material Safety Data Sheets (MSDS) must be obtained on all chemicals and placed in a shop
file for reference.