Yokogawa JUXTA VJ Series Limit Alarms - Manual (Page 53)

<6. Functions and Usage of D Registers >
6-3
IM 77J01J11-01E 3rd Edition : Oct. 15, 2007-00
6.3.1 Contents of D Registers
●
D0001: Bit configuration of status
The D0001 register represents errors and parameter data by a combination of bits in the
register.
In the table below, if any of the events shown occurs, the corresponding bit is set to "1."
The bit remains set to "0" if the event has not occurred yet. Note that blank fields indicate
bits not used, which are in "0."
Bit Event
0 EEP error
1 EEP sum error
2 Low-cut status
3 AD off-scale (burnout)
4 Communication error
5
6 History of power failures
7 RJC error
8 "1" if alarm 1 is on, or "0" if off
9 "1" if alarm 2 is on, or "0" if off
10 Status of contact input
11 Status of contact output
12 Overflow of computation cycle
13 Computation overflow
14
15