Yokogawa DAQWORX - Manual (Page 10)

1-3 IM WX1-07E
1
2
3
Index
Overv
ew
1.2 System Overvew
Hardware Requrements
The following hardware and software are required to use GateCONTROL.
• PC: A PC that runs one of the OS above, and that meets the
following CPU and memory requirements.
When Usng Wndows 2000 or Wndows XP
Pentium 4, 1.6 GHz or faster Intel x64 or x86 processor;
512 MB or more of memory
When Usng Wndows Vsta
Pentium 4, 3 GHz or faster Intel x64 or x86 processor; 2 GB or
more of memory
When Usng Wndows 7
32-bit edition: Intel Pentium 4, 3 GHz or faster x64 or x86
processor; 2 GB or more of memory
64-bit edition: Intel x64 processor that is equivalent to Intel
Pentium 4, 3 GHz or faster; 2 GB or more of memory
• Free disk space: 200 MB or more
• Communication interface:
An Ethernet (when connecting to DAQLOGGER or Remote
Monitor) or RS-232 port that is recognized by the operating
system.
• CD-ROM drive: Used to install the software.
• Peripheral devices: A mouse supported by the operating system.
• Monitor: A video card that is recommended for the OS and a display
that is supported by the OS, has a resolution of 1024×768 or
higher, and that can show 65,536 colors (16-bit, high color) or
more.
Note
An RS-232 to RS-485 converter is required to perform communications between the software
and another Modbus/RTU (RS-485) device (Yokogawa ML2 RS232C/RS485 converter
recommended).