3 calling up menu addresses, Calling up menu addresses – Yokogawa Multi Channel Oxygen Analyzer System ZR22/AV550G User Manual
Page 10
![background image](/manuals/360137/10/background.png)
<2. Basic Operation of the HART Communicator (Model 275)>
2-3
IM 11M12D01-51E
Function Key Labels
2.3 Calling Up Menu Addresses
3.1 Menu Tree shows the configuration of Online Menu which is needed for the operation with
HART Communicator. The desired item can be displayed with ease by understanding the menu
configuration.
When the HART Communicator is connected to the AV550G, “
Online” menu will be displayed after
the power is turned on (See Figure 2.2). Call up the desired item as follows:
Key operation
There are two ways to select a desired menu item.
1. Use the
or
key to select the desired item, and then press the
key.
2. Press the number key corresponding to the desired item.
• To return to the previous display, press the
key.
If
EXIT, ESC and ABORT are displayed, press the desired function Key.
Example: Call up the
“Tag” to change the tag number.
Check where “
Tag” is located in the menu tree. Then, call up “Tag” on the display according to the
menu tree.
F1
HELP
access on-line
help
RETRY
try to
reestablish
communication
EXIT
leave the
current menu
YES
answer to
yes/no question
ALL
include current
Hot Key item on
Hot Key Menu
for all devices
F2
ON/OFF
activates or
deactivates a
binary variable
DEL
delete current
character or Hot
Key Menu item
SEND
send data to
device, or mark
data to send
PGUP
move up one
help screen
PREV
go to previous
message in a
list of messages
F3
ABORT
terminate
current task
ESC
leave value
unchanged
QUIT
terminate session
because of a
communication
error
PGDN
move down one
help screen
NEXT
go to next
message in the
list of messages
HOME
go to the top
menu in the
device
description
SKIP
do not mark
variable to be
sent in off-line
configuration
ONE
include Hot Key
item for one
device
BACK
go back to
menu from
which HOME
was pressed
EDIT
edit a variable
value
ADD
add current item
to Hot Key
Menu
SAVE
save information
to
communicator
SEND
send data to
device, or mark
data to send
F4
OK
acknowledge
information on
screen
ENTER
accept
user-entered
data
NEXT
leave the
current menu
NO
answer to
yes/no question
F0204.ai