Yokogawa FieldMate - Manual (Page 14)

<3 PRM Synchronization Tool start>
3-5
IM 01R01A20-01E
 Handling overwrite messages
During the Restore activity, the Overwriting Message dialog box appears when the device
information from FieldMate is different from the device information in PRM. This dialog box
enables you to select the overwrite rule.
Table3-1 Situations that trigger the Overwriting Message
PRM Timestamp FieldMate Timestamp Result
Same Same None.
Newer Older Overwriting Message appears.
Older Newer Overwriting Message appears.
030304E.ai
Figure3-4 Overwriting Message dialog box
Click on the buttons corresponding to the following options:
• [Yes] to overwrite FieldMate data with PRM data for the current device.
• [Yes to All] to overwrite FieldMate data with PRM data for all devices.
• [No] to discard PRM data and retain FieldMate data for the current device.
• [No to All] to discard PRM data and retain FieldMate data for all devices.
• [Stop] to stop the activity.
NOTE
If an option is not selected within 30 minutes, the data transfer will skip the affected device and
proceed with the transfer for the remaining devices.
8th Edition : May 31, 2013-00