Yokogawa FieldMate - Manual (Page 13)

<3 PRM Synchronization Tool start>
3-4
IM 01R01A20-01E
8. In the right pane, click the check boxes corresponding to the devices you want to include in
the activity. A check mark appears on the top of the device tag to indicate that the device is
selected. Device tags that appear in blue indicate that the device was included in the list of
the previous data transfer.
Device layout displayed in the right pane is not always identical to the ones in PRM.
TIP
To view selected devices, select [Selected Devices] to view them. This will display all selected devices in the
right pane.
• To search for devices, select [Search]. This displays the Search pane where you can enter the search
keyword in [Values] and then click [Search].
NOTE
The number of selected and current devices in FieldMate should not exceed 300. The total
number of selected and current FieldMate devices is displayed at the bottom of the right pane.
9. Click [Advanced Configurations] if you want to change device data options. This opens the
Advanced Configurations dialog box.
SEE ALSO
For Advanced Configurations instructions, please see:
“Using Advanced Configurations” in 3-4, “Performing advanced configurations and searching devices”
10. Click [Start Restore]. The Restore Devices in Progress dialog box appears to display the
activity progress.
When you start the activity, a dialog box appears to display the activity progress. Click
[Show Details] to display the activity details. Activity details are categorized according to
type, date, time, and remarks.
TIP
For Advanced Configurations instructions, please see:
“Using Advanced Configurations” in 3-4, “Performing advanced configurations and searching devices”
11. When the activity is finished, click [Close].
8th Edition : May 31, 2013-00