Yokogawa FieldMate - Manual (Page 11)

<3 PRM Synchronization Tool start>
3-2
IM 01R01A20-01E
3-1 Restoring device information from PRM to
FieldMate
Select the Restore activity to transfer data records from PRM to FieldMate. This enables
users to refer to previous data when performing on-site device tuning using FieldMate.
 To restore device information:
1. On your desktop, select [Start] > [All Programs] > [YOKOGAWA FieldMate] > [Tools] > [PRM
Synchronization Tool]. The PRM-Login dialog box appears.
2. Enter or select a User Name from the [User Name] drop-down list.
3. Enter your password.
4. Select the name of the PRM Server you want to use in the [Server Set] drop-down list.
[Server Set] only appears if more than one PRM Server was defined in PRM Setup Tool.
5. Click [OK] to start PRM Synchronization Tool.
6. In the Welcome dialog box, click [Restore Devices]. This closes the Welcome dialog box
and displays the PRM Synchronization Tool window.
TIP
• To skip showing the Welcome dialog box, click [Do not show this again] to display the check mark. The
Welcome dialog box will not appear the next time you start PRM Synchronization Tool.
• To enable Welcome dialog box, click [Do not show this again] to remove the check mark: The Welcome
dialog box will now appear every time you start PRM Synchronization Tool.
• Aside from the Welcome dialog box, you can also select an activity from the toolbar or the Action menu.
030302E.ai
Figure3-2 Welcome dialog box
8th Edition : May 31, 2013-00