Description of the hart®- parameter, Description of the hart, Parameter -6 – Yokogawa RAMC User Manual
Page 54: Parameter

<7. HART-COMMUNICATION>
7-6
IM 01R01B02-00E-E 10th edition January 01, 2013 -00
All Rights Reserved. Copyright © 2003, Rota Yokogawa
Revisions #´s
Universal rev.
R
Fld Dev. rev.
R
HW rev.:
R
FW rev.:
R
ADJ-EE rev.:
R
CAL-EE rev.:
R
Review
Model
R
Dev Id
R
Manufacturer
R
Distributor
R
Flow Snsr s/n
R
Final assy no
R
Write protect
R
Tag
R/W
Descriptor
R/W
Message
R/W
Date
R/W
Poll addr
R/W
Num req preams
R
Num resp preams
W
Long tag
R/W
MS Code
R
Universal rev.
R
Fld. Dev. rev.
R
HW rev.:
R
FW rev.:
R
ADJ-EE rev.:
R
CAL-EE rev.:
R
7.4. Description of the HART
®
- Parameter
HOT KEY
Write protect
Read Status of write protection
Enable wrt 10min
Enable writing for 10 minutes by entering password. After writing
a parameter the time of 10 minutes starts again.
New password
Selection of a new password by entering up to 8 character
If 8 blanks are entered as new password, write protection is disabled.
If the user password is lost, a joker password is available from the
YOKOGAWA
service
department.
Online
This shows current process data.
Flow
Flow in selected measurement unit
Flow AO
Current output in mA
Flow URV
Upper range value related to the current output
Flow LRV
Lower range value related to the current output
The generic menu structure differs to the implemented menu structure. The generic mode does not support all
implemented commands. The parameters with grey background are also contained in generic mode.