Ramsey Winch DODGE WRAPAROUND KIT 295252 - Manual (Page 9)

KI-913275-0999-G 8
SOLENOID MOUNTING FOR PRO-8000/PRO-9000 SERIES WINCHES ON 1998-1999
VEHICLES ONLY
1. It will be necessary to remove bumper in order to drill mounting holes for solenoid assembly at the
required location.
2. YOU WILL NEED ASSISTANCE FOR THIS STEP.
3. Remove vehicle bumper mounting bolt and nut from R.H. side of vehicle frame and discard.
4. Remove vehicle bumper strut mounting hardware and save for later use. Shift strut down until it clears
the vehicle body mount.
5. Repeat 3 & 4 for L.H. side.
6. Have someone hold the vehicle bumper while you remove the vehicle bolt bracket and nuts from R.H.
side of vehicle frame and discard.
7. Repeat for L.H. side of vehicle.