Ramsey Winch DODGE WRAPAROUND KIT 295252 - Manual (Page 6)

KI-913275-0999-G 5
STEP 4
1. Install lower grille tube #8 between side plates #7, placing shims #32 between side plates and ends of tubes. Use 3/8-16NC x
3/4 lg. button hd. capscrews #18 to secure each end of tube to side plates. TIGHTEN HARDWARE SECURELY.
2. Install upper grille tube #8 between side plates #7, placing shims #32 between side plates and ends of tubes. Use 3/8-16NC x
3/4 lg. button hd. capscrews #18 to secure each end of tube to side plates. TIGHTEN HARDWARE SECURELY
3. Attach light tube #9 to side plate as shown. Use (2) 3/8-16NC x 1” carriage bolts #12, with lock washers #26, and nuts #20.
Note: On chrome kit #295253 use plated hardware at this location.
3. Secure fairlead to front of winch mounting channel as shown below using capscrews, lockwashers, and nuts furnished with
winch.
4. Attach license tag brackets #1 to bottom, L.H. side of mounting frame using (2) 1/4-20NC x 3/4 lg. capscrews #11, and
flatwashers #25. Insert capscrews through flatwashers, license-mounting bracket, then through bottom of mounting channel
as shown below. Secure using lockwasher #23 and nut #19.