Ramsey Winch DODGE WRAPAROUND KIT 295252 - Manual (Page 12)

KI-913275-0999-G 11
5. For the middle hole, insert (1) 7/16-14NC x 1-1/2 lg. hx hd capscrew #16, insert through bracket, then
through spacer plate #31 (if required) or tow hook and then through bumper mounting bracket and winch
mounting channel. Attach with flatwasher #28, lockwasher #27 and nut #22 as shown. DO NOT
TIGHTEN.
6. Place ½” nut extender #10 through hole in vehicle frame, just below bumper strut. NOTE: If you have not
already done so, it is necessary to temporarily loosen strut-mounting hardware and shift strut clear until
extender is attached. Install (1) 1/2-13NC x 1-1/2" lg. capscrew #17 with lockwasher #29 through
bracket, as shown in VIEW A-A, and thread into nut of nut extender (each side).
7. Shift vehicle bumper strut back into place and reinstall bumper strut mounting hardware.
Repeat 2-7 for L.H. bracket
After brackets are mounted to vehicle frame, tighten adjuster screw firmly against bottom of vehicle frame,
and tighten lock nuts against brackets.
Return to Step 3 on page 4.