Ramsey Winch 60K WILDCAT WINCH - Manual (Page 8)

7 OM-914214-0609-D
INSTRUCTIONS FOR DISASSEMBLY
1. Remove wire rope from drum.
2. Drain oil from winch by removing (2) plugs #54, removing the lower plug first.
3. When replacing lubricant, use 160 oz of applicable lube for your climate from table on page 6
adding 4 oz at #44 and the remaining at # 55.
4. Remove (2) nuts #408b from air cylinder #408a. Air cylinder may now be removed. If needed,
mounting bracket #401 may be removed by removing pin #404 from pin #405 and then sliding
pin out of mounting bracket. Brake band #5 may be expanded over drum flange to barrel for
easiest removal.
54
54
44
55
NOTE:
BRAKE BAND FITS
OVER DRUM FLANGE
5
14
66
408b
408a
404
405
401