Ramsey Winch 100K WILDCAT WINCH - Manual (Page 8)

INSTRUCTIONS FOR DISASSEMBLY
1. Remove wire rope from drum.
2. Drain oil from winch by removing (2) plugs #63, removing the lower plug first.
3. When replacing lubricant, use 496 oz of applicable lube for your climate from table on page 5,
adding 16 oz at #52 and the remaining at #64.
64
52
52
63
63
4. Remove (2) nuts #408b from air cylinder #408a. Air cylinder may now be removed. If needed,
mounting bracket #401 may be removed by removing pin #404 from pin #405 and then sliding
pin out of mounting bracket. Brake band #6 may be expanded over drum flange to barrel for
easiest removal.
16
6 OM-914221-0211-b
35
6
NOTE:
BRAKE BAND FITS
OVER DRUM FLANGE
404
408b
405
408a
401