Ramsey Winch 100K WILDCAT WINCH - Manual (Page 14)

21. While continuing to support the drum #16, remove the clutch #10, snap ring #68 and spacer
#26.
22. The output carrier assembly #23 may be slid from the drum assembly.
23. If required, spacer #27 can be removed from output carrier assembly.
24. The drum #14 is now supported only by the nylon strap and maybe removed as needed.
25. Remove drum driver #11 by removing (9) bolts #38.
26. The (2) bushings #31 may be pressed from the drum if replacement is necessary.
10
68
26
31
11
16
31
26
27
3
38
38
12 OM-914221-0211-b