IEI Integration AVL-3000 - Manual (Page 61)

AVL-3000 Advanced Auto Data Server
Page 47
4.3.7.1.1 Serial Port 7 Configuration
Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Disabled Disable the serial port
Enabled D EFAULT Enable the serial port
Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Auto D EFAULT The serial port IO port address and interrupt
address are automatically detected.
IO=260h;
IRQ=11
Serial Port I/O port address is 260h and the
interrupt address is IRQ11
IO=260h;
IRQ=10, 11, 12
Serial Port I/O port address is 260h and the
interrupt address is IRQ10, 11, 12
IO=268h;
IRQ=10, 11, 12
Serial Port I/O port address is 268h and the
interrupt address is IRQ10, 11, 12
IO=270h;
IRQ=10, 11, 12
Serial Port I/O port address is 270h and the
interrupt address is IRQ10, 11, 12
IO=278h;
IRQ=10, 11, 12
Serial Port I/O port address is 278h and the
interrupt address is IRQ10, 11, 12
4.3.7.1.2 Serial Port 8 Configuration
Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Disabled Disable the serial port
Enabled D EFAULT Enable the serial port