IEI Integration UPC-V315-NM70 - Manual (Page 92)

UP C-V315-NM70 P a n e l P C
P a g e 81

Force
BIOS
Sets display mode to force BIOS.

Keep
Current
D EFAULT Sets display mode to current.
 UEFI Bo o t [Dis ab led ]
Use the UEFI Boot option to enable or disable to boot from the UEFI devices.

Enabled Boot from UEFI devices is enabled.

Disabled D EFAULT Boot from UEFI devices is disabled.
 Bo o t Op tio n Prio rity
Use the Boot Option Priority function to set the system boot sequence from the available
devices. The drive sequence also depends on the boot sequence in the individual device
section.