B.7 other information, Ther, Nformation – IEI Integration UPC-V315-NM70 User Manual

Page 137: B.7 oth e r in fo rm a tio n

UP C-V315-NM70 P a n e l P C

P a g e 126

B.7 Oth e r In fo rm a tio n

B.7.1 Us in g AHCI Mo d e o r ALi M5283 / VIA VT6421A Co n tro lle r

When the system uses AHCI mode or some specific SATA controllers such as ALi M5283

or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key

recovery. Please follow the steps below to install the SATA RAID/AHCI driver.

S te p 1:

Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into

a USB floppy disk drive. The SATA RAID/AHCI driver must be especially

designed for the on-board SATA controller.

S te p 2:

Connect the USB floppy disk drive to the system.

S te p 3:

Insert the One Key Recovery CD into the system and boot the system from the

CD.

S te p 4:

When launching the recovery tool, press <F6>.