IEI Integration UPC-V315-NM70 - Manual (Page 78)

UP C-V315-NM70 P a n e l P C
P a g e 67
 Term in al Typ e [ANSI]
Use the Terminal Type option to specify the remote terminal type.

VT100 The target terminal type is VT100

VT100+ The target terminal type is VT100+

VT-UTF8 The target terminal type is VT-UTF8

ANSI D EFAULT The target terminal type is ANSI
 Bits p er s eco n d [115200]
Use the Bits per second option to specify the serial port transmission speed. The speed
must match the other side. Long or noisy lines may require lower speeds.

9600 Sets the serial port transmission speed at 9600.

19200 Sets the serial port transmission speed at 19200.

38400 Sets the serial port transmission speed at 38400.

57600 Sets the serial port transmission speed at 57600.

115200 D EFAULT Sets the serial port transmission speed at 115200.
 Data Bits [8]
Use the Data Bits option to specify the number of data bits.

7 Sets the data bits at 7.

8 D EFAULT Sets the data bits at 8.
 Parity [No n e]
Use the Parity option to specify the parity bit that can be sent with the data bits for
detecting the transmission errors.

None D EFAULT No parity bit is sent with the data bits.