IEI Integration UPC-V315-NM70 - Manual (Page 17)

UP C-V315-NM70 P a n e l P C
P a g e 6
Controlled by the BIOS (see Section 4.4.1).
Auto Dimming The auto dimming function is enabled or disabled. Controlled by the
BIOS (4.4.1).
Microphone The microphone is enabled or disabled. Controlled by the BIOS
(Section 4.4.1).
Audio Mute Light on when the audio is turned off.
Controlled by the hot keys (see Section 1.4.5).
Function Shows the status of the function key below the LED indicator. Blinks
when the corresponding button is pushed. LCD on/off
Volume Down
Volume Up
Brightness Down
Brightness Up
Table 1-1: LED Indicators
CAUTION:
If the CPU temperature alert LED shows in red, the user must lower the
environment temperature or close some running applications to cool
down the CPU.
1.4.2 Bo tto m P a n e l
The following is a list of the bottom panel peripheral device connectors on the
UPC-V315-NM70.
 1 x 9 V ~ 36 V DC power input terminal block (Power I)
 1 x 10.5 V ~ 36 V DC power input connector (Power II)
 2 x Audio jacks (Line out ,MIC)
 1 x CAN bus connector