IEI Integration UPC-V315-NM70 - Manual (Page 52)

UP C-V315-NM70 P a n e l P C
P a g e 41
Figure 3-34: VGA Connector
Pin Description Pin Description
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 GND
7 GND 8 GND
9 VCC / NC 10 GND
11 NC 12 DDC DAT
13 HSYNC 14 VSYNC
15 DDCCLK
Table 3-9: VGA Connector Pinouts
To connect the UPC-V315-NM70 to a monitor that accepts VGA video input, follow the
steps below,
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Figure 1-4.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector . Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
UPC-V315-NM70. See Figure 3-35.