IEI Integration KINO-9453 v2.00 - Manual (Page 33)

KINO-9453 Mini-ITX Motherboard
Page 15
2.5.3.1 Intel
®
945GME Analog CRT Support
A DB-15 VGA connector on the external peripheral interface connector panel is interfaced
to the Intel
®
945GME graphics engine. The Intel
®
945GME internal graphics engine, with
an integrated 400 MHz RAMDAC and hot plug CRT support, supports analog CRT
monitors up to QXGA.
2.5.3.2 Intel
®
945GME LVDS Support
A 30-pin LVDS crimp connector is interfaced to the Intel
®
945GME graphics engine. The
Intel
®
945GME internal graphics engine supports LVDS displays with the following
features:
Up to UXGA monitors with a maximum resolution of 1600 x 1200
18-bit or 24-bit 25 MHz to 112 MHz single-channel or dual-channel LVDS
screens
CPIS 1.5 compliant LVDS screens
2.5.3.3 Intel
®
945GME SDVO Support
The Intel
®
945GME internal graphics engine has the following SDVO output features:
Concurrent operation of PCIe x1 with SDVO
Two SDVO ports supported
o SDVO is muxed onto the PCIe pins
o DVI 1.0 support for external digital monitor
o Only Downstream HDCP support
o Display hot plug support
2.5.4 Intel
®
945GME Direct Media Interface (DMI)
Intel
®
945GME Northbridge GMCH is connected to the Intel
®
ICH7-M Southbridge Chipset
through the chip-to-chip Direct Media Interface (DMI). Features of the Intel
®
945GME DMI
are listed below:
2 GB/s (1 GB/s in each direction) bus speed
32-bit downstream address