IEI Integration KINO-9453 v2.00 - Manual (Page 117)

KINO-9453 Mini-ITX Motherboard
Page 99
DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.
Auto D EFAULT BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.
SWDMA0 Single Word DMA mode 0 selected with a maximum data
transfer rate of 2.1MBps
SWDMA1 Single Word DMA mode 1 selected with a maximum data
transfer rate of 4.2MBps
SWDMA2 Single Word DMA mode 2 selected with a maximum data
transfer rate of 8.3MBps
MWDMA0 Multi Word DMA mode 0 selected with a maximum data
transfer rate of 4.2MBps
MWDMA1 Multi Word DMA mode 1 selected with a maximum data
transfer rate of 13.3MBps
MWDMA2 Multi Word DMA mode 2 selected with a maximum data
transfer rate of 16.6MBps
UDMA1 Ultra DMA mode 0 selected with a maximum data transfer
rate of 16.6MBps
UDMA1 Ultra DMA mode 1 selected with a maximum data transfer
rate of 25MBps
UDMA2 Ultra DMA mode 2 selected with a maximum data transfer
rate of 33.3MBps
UDMA3 Ultra DMA mode 3 selected with a maximum data transfer
rate of 44MBps (To use this mode, it is required that an
80-conductor ATA cable is used.)