IEI Integration ICE-PV-N4551_D5251 - Manual (Page 45)

ICE-PV-N4551_D5251 COM Express Type 2 Module
Page 35
4.4.1 LVDS Panel Resolution
Jumper Label: SW1
Jumper Type: 4-in-1 switch
Jumper Settings: See Table 4-2
Jumper Location: See Figure 4–2
This switch sets the resolution of the panel attached to the LVDS output. Settings are
shown in Table 4-2.
1-8 2-7 3-6 4-5 DESCRIPTION VBIOS ID
OPEN OPEN OPEN OPEN 640 x 480 (18-bit) 1
CLOSED OPEN OPEN OPEN 800 x 480 (18-bit) 2
OPEN CLOSED OPEN OPEN 800 x 600 (18-bit) 3
CLOSED CLOSED OPEN OPEN 1024 x 768 (18-bit) 5
OPEN OPEN CLOSED OPEN 1280 x 1024 (18-bit) 11
CLOSED OPEN CLOSED OPEN 1366 x 768 (18-bit) 10
OPEN CLOSED CLOSED OPEN 1280 x 800 (18-bit) 7
CLOSED CLOSED CLOSED OPEN 1280 x 600 (18-bit) 15
Table 4-2: LVDS Panel Resolution
4.5 Mounting the ICE-PV-N4551/D5251
WARNING!
Never run the embedded module without an appropriate heat sink.