IEI Integration ICE-PV-N4551_D5251 - Manual (Page 42)

ICE-PV-N4551_D5251 COM Express Type 2 Module
Page 32
4.2 Unpacking
NOTE:
If any of the items listed below are missing when the
ICE-PV-N4551/D5251 is unpacked, do not proceed with the installation
and contact the ICE-PV-N4551/D5251 reseller or vendor.
4.2.1 Unpacking Precautions
Before installing the ICE-PV-N4551/D5251, unpack the CPU module. Some components
on ICE-PV-N4551/D5251 are very sensitive to static electricity and can be damaged by a
sudden rush of power. To protect it from being damaged, follow these precautions:
 The user should ground them self to remove any static charge before
touching the ICE-PV-N4551/D5251. To do so wear a grounded wrist strap at
all times or frequently touch any conducting materials that is connected to the
ground.
 Handle the ICE-PV-N4551/D5251 by its edges. Do not touch the IC chips,
leads or circuitry if not necessary.
Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from
static discharge.
4.2.2 Checklist
When unpacking the ICE-PV-N4551/D5251, please make sure that the package contains
the following items.
 1 x ICE-PV-N4551/D5251 embedded module
 1 x Heatspreader
 1 x Utility CD
 1 x QIG