IEI Integration ICE-PV-N4551_D5251 - Manual (Page 22)

ICE-PV-N4551_D5251 COM Express Type 2 Module
Page 12
2.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
ICE-PV-N4551/D5251 may result in permanent damage to the
ICE-PV-N4551/D5251 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the ICE-PV-N4551/D5251. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the ICE-PV-N4551/D5251 or any other electrical
component is handled, the following anti-static precautions are strictly adhered to.
 Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: When configuring the ICE-PV-N4551/D5251, place it
on an antic-static pad. This reduces the possibility of ESD damaging the
ICE-PV-N4551/D5251.
 Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.
2.2 Unpacking
2.2.1 Unpacking Precautions
When the ICE-PV-N4551/D5251 is unpacked, please do the following:
 Follow the anti-static precautions outlined in Section 2.1.
 Make sure the packing box is facing upwards so the ICE-PV-N4551/D5251
does not fall out of the box.
 Make sure all the components shown in Section 2.3 are present.