IEI Integration iQ7-US15W - Manual (Page 96)

IQ7 Design Guide
Page 84
ƒ 32Bit Data Transfer [Enabled]
Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.
Î
Disabled Prevents the BIOS from using 32-bit data transfers.
Î
Enabled D EFAULT Allows BIOS to use 32-bit data transfers on supported
hard disk drives.
6.3.3 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8]
RS-485 Control for SP1 [Disabled]
Serial Port2 Address [2F8]
RS-485 Control for SP1 [Disabled]
Serial Port3 Address [3E8]
Serial Port4 Address [2E8]
Parallel Port Address [378]
Parallel Port Mode [Normal]
Parallel Port IRQ [IRQ7]
Allows BIOS to select
Serial Port Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
ƒ Serial Port1 Address [3F8]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Î
Disabled No base address is assigned to Serial Port 1
Î
3F8 D EFAULT I/O port address is 3F8
Î
3E8 I/O port address is 3E8
Î
2E8 I/O port address is 2E8