IEI Integration iQ7-US15W - Manual (Page 95)

IQ7 Design Guide
Page 83
ƒ DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.
Î
Auto D EFAULT BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.
Î
SWDMA0 Single Word DMA mode 0, max transfer rate: 2.1 MB/s
Î
SWDMA1 Single Word DMA mode 1, max transfer rate: 4.2 MB/s
Î
SWDMA2 Single Word DMA mode 2, max transfer rate: 8.3 MB/s
Î
MWDMA0 Multi Word DMA mode 0, max transfer rate: 4.2 MB/s
Î
MWDMA1 Multi Word DMA mode 1, max transfer rate: 13.3 MB/s
Î
MWDMA2 Multi Word DMA mode 2, max transfer rate: 16.6 MB/s
Î
UDMA0 Ultra DMA mode 0, max transfer rate: 16.6 MB/s
Î
UDMA1 Ultra DMA mode 1, max transfer rate: 25 MB/s
Î
UDMA2 Ultra DMA mode 2, max transfer rate: 33.3 MB/s
Î
UDMA3 Ultra DMA mode 3, max transfer rate: 44 MB/s (To use this
mode, it is required that an 80-conductor ATA cable is used.)
Î
UDMA4 Ultra DMA mode 4, max transfer rate: 66.6 MB/s (To use this
mode, it is required that an 80-conductor ATA cable is used.)
Î
UDMA5 Ultra DMA mode 5, max transfer rate: 99.9 MB/s (To use this
mode, it is required that an 80-conductor ATA cable is used.)
ƒ S.M.A.R.T [Auto]
Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and
Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts
impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.
Î
Auto D EFAULT BIOS auto detects HDD SMART support.
Î
Disabled Prevents BIOS from using the HDD SMART feature.
Î
Enabled Allows BIOS to use the HDD SMART feature