IEI Integration iQ7-US15W - Manual (Page 20)

IQ7 Design Guide
Page 8
2.1 Peripheral Interface Connectors
This chapter gives an overview of all the connectors on the IQ7-US15W and their pin
definitions.
2.2 Layout
5
Figure 2-1 shows the on-board peripheral connectors, rear panel peripheral connectors
and on-board jumpers.
Figure 2-1: Connector and Jumper Locations
2.3 Connector Pinouts
Table 2-1 shows a list of the peripheral interface connectors on the IQ7-US15W. Detailed
descriptions of these connectors can be found below.
Connector Type Label
QSeven Connector QSeven connector J1
IDE Connector Flat cable CN16
Table 2-1: Peripheral Interface Connectors