3 compactflash® master/slave selection, 4 compactflash® voltage selection, 5 lan & pcie enable/disable – IEI Integration iQ7-US15W User Manual

Page 77: Table 4-32: compactflash® master/slave selection, Table 4-33: compactflash® voltage selection

IQ7 Design Guide

Page 65

4.4.3 CompactFlash® Master/Slave Selection

Jumper Label:

JP4

Jumper Type:

3-pin header

Jumper Settings:

See Table 4-32

Jumper Location:

See Figure 4–29

Sets the CompactFlash® slot as the IDE primary master or primary slave.

Pin Description

1-2

Slave

2-3 Master

Table 4-32: CompactFlash® Master/Slave Selection

4.4.4 CompactFlash® Voltage Selection

Jumper Label:

JP3

Jumper Type:

3-pin header

Jumper Settings:

See Table 4-33

Jumper Location:

See Figure 4–29

Sets the voltage of the power supplied to the CompactFlash® card.

Pin Description

1-2

5.0 V

2-3 3.3

Table 4-33: CompactFlash® Voltage Selection

4.4.5 LAN & PCIe Enable/Disable

Jumper Label:

SW3

Jumper Type:

4 switches

Jumper Settings:

See Table 4-34

Jumper Location:

See Figure 4–29

This manual is related to the following products: