IEI Integration iQ7-US15W - Manual (Page 49)

IQ7 Design Guide
Page 37
Pin Description Pin Description
37 HDC CS0# 38 HDC CS1#
39 HDD ACTIVE# 40 GROUND
41 VCC 42 VCC
43 GROUND 44 N/C
Table 4-8: IDE Connector Pinouts
4.2.8 IDE (CPU Module to Baseboard)
CN Label: CN6
CN Type: 40-pin flat cable
CN Location: See Figure 4-9
CN Pinouts: See Table 4-9
Connects the IDE channel from the CPU module to the baseboard. IDE is not a supported
I/O interface for the QSeven standard, so the flat cable optionally provides this interface,
which is commonly supported by the Southbridge on the CPU module.
Figure 4-9: CPU Module to Baseboard IDE Connector Location
Pin Description Pin Description
1 Power LED+ 2 Speaker+