1 at/atx mode selection, Figure 4–29: jumpers, Table 4-29: at/atx mode selection – IEI Integration iQ7-US15W User Manual

Page 75

IQ7 Design Guide

Page 63

Figure 4–29: Jumpers

4.4.1 AT/ATX Mode Selection

Jumper Label:

JP8 & SW5

Jumper Type:

6-pin header & switch

Jumper Settings:

See

Table 4-29 & Table 4-30

Jumper Location:

See Figure 4–29

Set both of the jumpers select AT or ATX power mode for the IQ7 Design Guide. AT

power mode limits the system to on/off. ATX allows the system to use various power

saving states and enter a standby state, so the system can be turned on remotely over a

network. The settings on both jumpers should be the same.

JP8 Description

1-2

ATX mode

3-4 AT

mode

5-6 No

function

Table 4-29: AT/ATX Mode Selection

This manual is related to the following products: