IEI Integration iQ7-US15W - Manual (Page 41)

IQ7 Design Guide
Page 29
4.1.3 External Interface Panel Connectors
5
Table 4-2 lists the rear panel connectors on the IQ7-DB-MITX. Detailed descriptions of
these connectors can be found in Section 2.1.
Connector Type Label
Audio connectors Audio jacks AUDIO1
Keyboard and mouse connectors Dual PS/2 CN9
LAN Connector RJ-45 LAN_USB1
LAN_USB2
RS-232 serial port connector D-sub 9-pin male COM1
USB 2.0 ports Dual USB ports LAN_USB1
LAN_USB2
VGA port connector 15-pin female VGA CON1
Table 4-2: Rear Panel Connectors
4.2 Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassis. This section has complete descriptions of
all the internal, peripheral connectors on the IQ7-DB-MITX.
4.2.1 ATX Power Connector
CN Label: PWR1
CN Type: 20-pin ATX (2x10)
CN Location: See
5
Figure 2-3
CN Pinouts: See
5
Table 2-3
The ATX connector is connected to an external ATX power supply. Power is provided to
the system, from the power supply through this connector.