IEI Integration iQ7-US15W - Manual (Page 78)

IQ7 Design Guide
Page 66
These settings enable and disabled these devices on the IQ7 Design Guide.
SW3 Description
1-On & 2-Off PCIe x1 slot enabled & LAN2 disabled
1-Off & 2-On LAN2 enabled & PCIe x1 slot disabled
3-On & 4-Off LAN1 enabled & PCIe Mini card disabled
3-Off & 4-On PCIe Mini enabled & LAN1 disabled
Table 4-34: LAN & PCIe Enable/Disable
4.4.6 TTL Voltage Selection
Jumper Label: J_VLVDS1
Jumper Type: 3-pin header
Jumper Settings: See Table 4-35
Jumper Location: See Figure 4–29
Selects the voltage of the LVDS connector.
Pin Description
1-2 3.3 V
2-3 5.0 V
Table 4-35: LVDS Voltage Selection
4.4.7 SATA & Graphics Settings
Jumper Label: SW4
Jumper Type: 4 switches
Jumper Settings: See Table 4-36
Jumper Location: See Figure 4–29
These settings enable and disabled these devices on the IQ7 Design Guide.
SW4 Description
1–On & 2-Off SDVO enabled & VGA disabled
1-Off & 2-On VGA enabled & SDVO disabled