Extron Electronics System 7SC - Manual (Page 43)

3-15 System 7SC • Operation and Configuration
Clearing IR commands from memories
The memory for each Display, Room, or input selection button can either be clear
(empty, no stored commands are associated with the button) or saved (containing
an IR command that is saved in nonvolatile memory). To clear IR commands from
a button’s memory:
1. From the main menu press the Menu button until the IR Learning
Configuration menu appears.
2. Scroll through the submenu to the desired button by pressing the Next
button.
3. Rotate the Adjust knob ( ) to toggle from the button’s status to the Clear
command.
4. Press the Next button to clear the IR commands from that Display, Room, or
input selection button’s memory.
5. Press Next to scroll to another button, or press Menu or allow the System 7 to
time out to the main screen.
Extron
System 7SC
AUDIO/VIDEO
ADJUSTMENTS
Display Power: On
Status: Saved
MENU
SWITCHER SETUP/
CONFIGURATION
MENU
Display Power: Off
Status: Saved
Scrolls through
buttons that
can have
associated
IR commands
NEXT NEXT NEXT
Display Power: On
Status: Clear
NEXT NEXT
Display Power: On
Learn?
Display Power: On
Clear?
Display Power: On
Clearing IR!
The button's IR
codes have been
cleared from
memory.
MENU
From any screen in
this submenu,
press MENU to go to
the IR LEARNING menu.
IR LEARNING
CONFIGURATION
Clearing IR commands from a button’s memory