ZOLL AED Plus Fully Automatic Rev B - Manual (Page 23)

Fully Automatic AED Plus Administrator’s Guide 13
Applying pedi-padz II (Infant/Child Electrodes)
Prepare the victim before attaching the electrodes.
To prepare the victim:
1. Remove all clothing covering the victim’s chest.
2. Ensure the victim’s chest is dry.
To apply the electrodes:
1. Tear open the electrode package and unfold the inner package to expose the electrodes. Place the
electrodes on the victim according to the graphics on the package (see Figure 6).
2. Remove the round electrode from its backing material and place it on the victim’s chest (as shown
in Figure 6).
3. Place your hand on the electrode edge and, using the other hand, gently roll the electrode onto the
victim’s chest, pushing any air out from beneath the electrode as you go.
4. Roll the victim onto his/her chest, remove the square electrode from its backing and place it on
the victim’s back (as shown in Figure 6).
5. Place your hand on the electrode’s edge and, using your other hand, roll the electrode onto the
victim’s skin, pushing any air out from beneath the electrode as you go.
6. Roll the victim onto his/her back and follow the Fully Automatic AED Plus prompts.
NOTE The pedi-padz II (infant/child electrodes) can also be used with ZOLL pacemaker products for up to one
hour of pacing (see the M Series Operator’s Guide for information about pacing).
Figure 6: Placement of pedi-padz II
II II
9305-0627-01 Rev. 1
ZOLL Medical Corporation 269 Mill Road
Chelmsford, MA 01824-4105 USA 978-421-9655
0123
Infant/Child Defibrillation Electrodes
0-8 Years <55lbs / 25kg
2
3
®
®